Brand: Zoeller

• Non-Clogging vortex impeller.
• Float operated, submersible (NEMA 6) 2-pole mechanical switch & variable level long cycle systems available.
• UL Listed 3-wire cord plug; 9 ft. standard for automatic, 15 ft. standard for nonautomatic.
• Corrosion resistant powder coated epoxy finish.
• No sheet metal parts to rust or corrode.
• Stainless steel screws, switch arm, guard and handle.
• No screens to clog.
• Watertight neoprene ring between motor and pump housing.
• Solid buoyant polypropylene float.
• Motor - 60 Hz, 1550 RPM, oil-filled, hermetically sealed, automatic reset thermal overload protected.
• Upper and lower sleeve bearings running in bath of oil.
• Entire unit pressure tested after assembly.
• Carbon and ceramic shaft seal.
• Maximum temperature for effluent or dewatering - 130°F (54°C).
• Passes 1/2" inch spherical solids.
• 1 1/2" NPT Discharge.
• On point - 7 1/4";
• Off point - 3".
• Major width - 10 3/32".
• Height - 10 1/16".
• Cast iron switch case, motor & pump housing.
• Glass-filled polypropylene base.
• Engineered, glass-filled, plastic impeller with metal insert.
• Stainless steel guard & handle.
• Bearing - lower & upper oil fed cast iron.

Note: The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with nonautomatic pumps.